[email protected] |   080 539-3883 |  

20′ ISO Tank Container for rental

iso tank for rental

PETIKEMAS offers competitive rates for 20’ ISO TANK CONTAINER short-term or long-term rental.

Contact us for more information
phone icon +6680 539-3883
email icon [email protected]

Other services include

  • 20’ ISO TANK CONTAINER Logistics
  • 20’ ISO TANK CONTAINER Cleaning & Storage

ISO Tank Logistics
ISO Tank Logistics
ISO Tank Logistics
ISO Tank Logistics
ISO Tank Logistics
ISO Tank Logistics
ISO Tank Logistics
ISO Tank Logistics
ISO Tank Logistics
ISO Tank Logistics
ISO Tank Logistics


20' ISO Tank Container Rental

26,000L-20′ ISO TANK CONTAINER Specification

CAPACITY 26,000 Litres
Frame (L/W/H) 6058/2438/2591mm
TARE MASS 3,800 kg
MAX GROSS MASS 36,000 kg
PRODUCTS General purpose liquids
HYDROSTATIC TEST PRESSURE 6 bar
VESSEL DESIGN TEMP -40℃ to 130℃
TEMPERATURE (@atm P) 140℃
DESIGN CODE ASME Ⅷ DIV. 1
TYPE APPROVALS UN portable tank (T11 IMDG, CFR49, ADR/RID), UIC, TIR, CSC, TC, ADR L4BN
CLASSIFICATION Bureau Veritas
STACKING TEST Each container is approved for 9 high stacking at 24,000kg
SAFETY RELIEF ASSEMBLY 2½” BSP safety relief valve without gauze. Pressure only model set at +4.4 bar (63.8psi), complete with Adaptor and gauge guard
MANHOLE 500mm low profile, 8 point fixing. The manlid is completedwith TIR
AIR INLET ASSEMBLY DN 40 ball valve terminating with 1½” BSP connection and cap
TOP DISCHARGE PROVISION DN80 stainless steel 316 tank pad with not less than 94mm hole with blind flange. The assembly is fitted off centre on a low profile horizontal tank pad. Flange to be dual drilled: 6×M12 on 168.3PCD and 4×M16 on 160PCD
BOTTOM DISCHARGE FV: DN80 30° Univalve footvalve terminating with a 3″ BSP spigot with cap and chain. Perolo: DN80 30° TWINCO footvalve terminating with a 3″ BSP spigot with cap and chain. The bottom flange is a normal flange.
STEAM HEATING 8 runs steam heating system. Longitudinal steam channels manufactured from Duplex stainless steel. Heating provided to BDC area. Actual heating area 4.57 m2, effective heating area 9.6m2.
PRESSURES 4 bar working pressure
CONNECTIONS 1″ BSP inlet, 1″ BSP outlet. Stainless steel dustcaps fitted.
INSULATION 50mm Rockwool where possible.

Extract from Table IMDG 4.2.5.2.6 – Portable tank instructions

Portable tank instruction Minimum shell thickness (reference steel) Minimun test pressure (bar) Bottom opening requirement
T1 See 6.7.2.4.2 1.5 2 closures
T2 See 6.7.2.4.2 1.5 3 closures
T3 See 6.7.2.4.2 2.65 2 closures
T4 See 6.7.2.4.2 2.65 3 closures
T5 See 6.7.2.4.2 2.65 Prohibited
T6 See 6.7.2.4.2 4 2 closures
T7 See 6.7.2.4.2 4 3 closures
T8 See 6.7.2.4.2 4 Prohibited
T9 6mm 4 Prohibited
T10 6mm 4 Prohibited
T11 See 6.7.2.4.2 6 3 closures
T12 See 6.7.2.4.2 6 3 closures
T13 6mm 6 Prohibited
T14 6mm 6 Prohibited
T15 See 6.7.2.4.2 10 3 closures
T16 See 6.7.2.4.2 10 3 closures
T17 6mm 10 3 closures
T18 6mm 10 3 closures
T19 6mm 10 Prohibited
T20 8mm 10 Prohibited
T21 10mm 10 Prohibited
T22 10mm 10 Prohibited

ISO Tank

ISO Tank Logistics
ISO Tank Logistics
ISO Tank Logistics
ISO Tank Logistics
ISO Tank Logistics
.